13X Molecular Sieve

YAMTOP Molecular Sieve 13X(APG) is the sodium form of the type X crystal and has a much larger pore opening than the type A crystals.13X Molecular Sieve will adsorb molecules with a kinetic diameter of less than 10 Angstrom (1.0 nm) and exclude those larger. It also has the highest theoretical capacity of the common adsorbents and very good mass transfer rates.

Inquire Now

Product Description

YAMTOP Molecular Sieve 13X(APG) is the sodium form of the type X crystal and has a much larger pore opening than the type A crystals.13X Molecular Sieve will adsorb molecules with a kinetic diameter of less than 10 Angstrom (1.0 nm) and exclude those larger.13X Molecular Sieve also has the highest theoretical capacity of the common adsorbents and very good mass transfer rates. It can remove impurities too large to fit into a type A crystal and is commonly used to separate nitrogen from oxygen.

Model	YT13X
Color	Light gray
Nominal pore diameter	10 angstroms
Shape	Sphere
Diameter (mm)	1.6-2.5 (8*12 mesh)	3.0-5.0(4*8mesh)
Size ratio up to grade (%)	≥98	≥98
Bulk density (g/ml)	≥0.64	≥0.62
Wear ratio (%)	≤0.20	≤0.20
Crushing strength (N)	≥25/piece	≥80/piece
Static H2O adsorption (%)	≥26.5	≥26.5
Static CO2 adsorption (%)	≥17.5	≥17.5
Water content (%)	≤1.5	≤1.5
Typical Chemical Formula	Na2O. Al2O3. (2.8±0.2) SiO2. (6~7)H2O SiO2 : Al2O3 ≈2.6-3.0
Typical Application	a) Removal of CO2 and moisture from air (air pre-purification) and other gases. b) Separation of enriched oxygen from air. c) Removal of n-chained compositions from aromatics. d) Removal of R-SH and H2S from hydrocarbon liquid streams (LPG, butane etc.) e) Catalyst protection, removal of oxygenates from hydrocarbons (olefin streams). f) Production of bulk oxygen in PSA units.





Warranty	a)By National Standard HG-T_2690-2012 b)Offer lifetime consultation on problems occurred

Regeneration:

YAMTOP molecular sieve Type 13X(APG) can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
To remove moisture from a 13X Molecular Sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptans or CO2 levels below 2 ppm.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.

The service life of the 13X Molecular Sieve is usually determined by four points:

The first is the grade of the molecular sieve, the second is the service environment (affected by moisture and oil pollution), the third is the compactness of filling, and the fourth is regular maintenance. The higher the grade of 13X Molecular Sieve, the longer the service life. A dry and oil-free environment can also ensure the maximum service life of the molecular sieve. Of course, there are also factors of appropriate filling density & regular maintenance. In a word, the service life of 13X Molecular Sieve can be prolonged as long as they are used scientifically and maintained well.

Size:

13X(APG) - Zeolite are available in beads of 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder.

Attention:

To avoid damp and pre-adsorption of organic before running, or must to be reactivated.

Yamtop is a professional manufacturer and supplier of 13X Molecular Sieve in China. If you want to know about Molecular Sieve 13x Price,get in touch with us today.

Types of Molecular Sieves

Product List