Home > Products > Activated Alumina > Activated Alumina for Chlorine Removal > Activated Alumina for Chlorine Removal
Product Description
Activated Alumina for Chlorine Removal from YAMTOP is efficiently to take off the chlorine agent, it has wide temperature range, high low temperature uniform activity, and good resistance to water.It can continue to work at any temperature environment, and continuous adsorption HCl. Get a free quotation.
In petrochemical production process, the raw material of chlorine in gas can cause a variety of catalyst and adsorbent poisoning, make absorbent and catalytic performance failure, the existence of chlorine will severely corrosive devices and equipment, also affect the normal operation of the production, so we must remove the chlorine during the production process. Usually used the solid to take off the chlorine from the agent of chloride in the gas.
A white or slightly red particle, ball-shaped or roll-shaped, activated alumina is insoluble in water and organic solvent, soluble in strong acids and alkali, odorless, tasteless and non-toxic.
In the petrochemical production process, the chlorine in the feed gas can cause a variety of catalyst and adsorbent poisoning, so that the adsorbent and catalytic performance failure. Also the presence of chlorine will seriously corrode the device and equipment, affecting the normal operation of production, so it must be removed the Chloride. Usually we would like to use solid dechlorination agent Activated Alumina to remove the chloride in the feed gas.
The active components and reaction of chlorine after not the characteristics of migration, can be used to take off the hydrogen and protection syngas catalysts and sorbents, also can be widely used for naphtha, natural gas, H2, and N2, NH3, CO and CO2 gas from raw materials such as chlorine.
Activated alumina is a highly effective adsorbent in both gas and liquid applications, and as such, is employed by a number of industries for targeted removal of components from other media.
As an adsorbent, activated alumina is most well known for its use in water filtration applications, where it serves as a cost-effective adsorbent for removing fluoride from water. It is also capable of removing a variety of other contaminants, including arsenic, lead, and sulfur.
Similar to its role as an adsorbent, activated alumina can also adsorb water from air, allowing it to be used as a desiccant; activated alumina can capture and trap water in order to keep things dry, much like silica gel. As a desiccant, activated alumina can adsorb up to 20% of its own weight in water at a relative humidity of 50%.
Activated alumina is employed as a desiccant in a wide variety of applications, including the removal of water vapor from gases in industrial settings. Water adsorbed onto the activated alumina can then be desorbed via thermal treatment and the alumina reused.
Activated alumina is also widely used as a catalyst, with roles as the catalyst itself, as well as an inert carrier, or substrate for other catalysts.
As a catalyst, activated alumina is most well known for its role as a Claus catalyst; activated alumina is the most commonly used Claus catalyst in sulfur recovery endeavors at oil and gas refineries.
– Working temperature: 5-400℃
– Working pressure: ordinary pressure to 0.8Mpa
– Space velocity: 1000-3000h-1
– Bed height to diameter ratio: > 3
– Chlorine release rate: ≥99.9%
YTA06 Activated alumina for Chloride removal is equal to BASF CL750 and CL760.
|
Appearance |
White Sphere |
|
|
Size |
mm |
3-5 |
|
Al2O3+additives |
% |
94.5 |
|
Fe2O3 |
% |
0.02 |
|
Crush Strength |
N/PC |
>20 |
|
Surface Area |
m2/g |
300-330 |
|
Pore volume |
cm3/g |
0.45~0.50 |
|
Bulk Density |
g/cm3 |
0.70-0.80 |
|
LOI |
% |
<8.0 |
|
Attrition loss |
% |
0.1 |
YTA07 Activated alumina for Chloride removal is equal to UOP CLR-204.
|
Appearance |
White Sphere |
||
|
Size |
Mesh |
7*12 |
5*8 |
|
Al2O3+additives |
% |
93.5 |
|
|
Crush Strength |
N/PC |
30 |
35 |
|
Surface Area |
m2/g |
≥130 |
≥130 |
|
Bulk Density |
g/cm3 |
0.75 |
0.75 |
|
LOI |
% |
6.5 |
6.5 |
|
Attrition loss |
% |
0.1 |
0.1 |
• 25kg/plastic bag/ super sack
• 150kg/steel drum
Yamtop is a professional HCL Removal Catalyst Supplier, if you want to get more information on Activated Alumina for Chlorine Removal and HCl Activated Alumina, please feel free to contact us, we would like to offer any professional assistance you need.
